Hydro-electric power has begun being generated in the Northern Territory as a result of Power and Water’s investment in diverse renewable energy sources.

A micro-hydro generator was commissioned at Manton Dam, NT on the 12th of February marking a milestone in the history of renewable energy in the Northern Territory.

The project uses an available, renewable resource that had previously not been utilised.

The micro-hydro generator will be registered with the Clean Energy Regulator as an accredited renewable energy power station.  It will be the first grid-connected hydro power station in the Northern Territory.

The generator will run 24 hours per day, all year round,  using the environmental flow discharged from the dam and will produce enough energy to power four average Darwin homes.

Manton Dam is currently full and spilling so the generator is working at capacity resulting in an even higher than expected 4kW.

Charles Darwin University’s Centre for Renewable Energy was involved in the very early stages of the project, exploring the feasibility of hydro-power at Manton Dam.

A future stage 2 of the project will aim to use the potential of wet season spill from the dam.

Interpretive signage will be installed at the hydropower station explaining its operation to visitors to the site, which is located near the entrance gate to Manton Dam.

The micro-hydro generator is an example of Power and Water’s commitment to exploring diverse renewable energy sources.

Power and Water’s renewable energy portfolio now includes solar PV, landfill gas, wind and hydro power as well as solar hot water generation at a customer level.

©2024 Utility Magazine. All rights reserved


We're not around right now. But you can send us an email and we'll get back to you, asap.


Log in with your credentials

Forgot your details?